Guitar Files - Store Front

AMT Electronics SS-20 Guitar Preamp

Sun, 13 Apr 2008 23:59:23 -0500

]]>

AMT Electronics SS-20 Guitar Preamp:

Brand new from AMT Electronics, the amazing new SS-20 Guitar Preamp. Incredible Clean, Overdrive, Distortion, and Lead tones in a compact tube valve driven pedal. We are raising the bar and technology in modern day pedal design and offer affordable high end guitar tone pedals. This one is going to be finding its way onto lots of pedalboards! Our principle and motto for this device is it is the VALVE that sounds and sings, however, the transistors do their best to help it sound in all its beauty and originality.

The Features of SS-20:

High-grade high-voltage feed of triodes.
Application of special semi-conductor amplifiers modeling triode-based harmonics and providing signal amplitude necessary for high-grade valve operation.

In order to achieve the full opening of input valve cascades working in the "hottest" conditions the giant amplitude of one hundred and more volts is necessary. The dynamic properties characteristic to valve based preamps are implemented in SS-20 due to the elimination of signal limiting OA (feed level of 20-25V) in the part of preliminary amplification and using special cascades capable of reaching 250V amplitude with nonlinearity similar to 12AX7 triode. Thus, we managed to achieve full dynamic characteristics of guitar signal without usual hybrid "squeeze" as well as assign special sound character to SS-20.

Special attention was also paid to clean channel in this section we also followed the way of preserving the dynamics of guitar signal with simultaneous formation of soft "nonlinearity" inherent in the cascades on vacuum triodes. It also allowed us to escape both the "squeeze" and "refinement" peculiar to many clean-channels of hybrid devices.

The architecture of SS-20:

Two high-grade channels CLEAN and DRIVE with the possibility of Drive-channel operation in two basic modes: moderate sensitivity (CRUNCH) and high sensitivity (LEAD).
Effects Loop Send and Return.
Operation via both direct unaltered signal for guitar amplifiers heads, combos, and speakers (OUTPUT jack) as well as speaker cabinet compensated output for mixing consoles, computers, or other recording devices.

The basis of the inner preamp structure is the principle of maximum use of amplification and nonlinear transformation of the valve part of the device. Thus, the semi-conductor part of the hybrid practically does not participate in the sound limitation (except for the use of preamp in LEAD mode at Gain LEAD level of higher than 7) and the entire spectrum is formed by the valve preamp part. In the preamp stage the quantity of semi-conductor cascades is not used in the sound processing, and in the absence of jacks in SEND and RETURN the signal is forwarded to OUTPUT through compensating circuits directly from the output triode cascade. Therefore it is advised to use high quality minimum length cables for connecting the preamp output with guitar amplifier input.

The SS-20 uses the original cabinet emulator, however, ONLY in direct out mode! It models the amplitude-frequency characteristics of guitar amplification systems for the most accurate reproduction and ease of recording direct. Secondly, it simulates own nonlinearity of dynamic head peculiar to instrumental loudspeakers, that in its turn colors the output signal with short-range harmonics making it live and closer to real. Our unique speaker emulator circuitry supplements the signal with 2nd and 3rd harmonic with smooth increase in their level at signal level growth (it actually is similar to instrumental head in the closed cabinet), not found on other manufacturers pedals.

Technical Information:

Power: External Adaptor AC 120V 12V DC .8A (included)
Tubes: 1 x 12AX7 Incandescence - 12.6V (6.3V)
Anode Voltage: DC 290V
Jacks: Amplifier Output - for Combo Connection
Mixer Output - for Mixer/Recorder Connection
Effects Loop Send and Return
Input In
Bypass: Left F Switch - DRIVE effect on/off
Right F Switch - DISTORTION effect on/off

Audio Demo 1

]]>

AMT Electronics Freak Guitar Mattias Eklundh Custom Shop

Sun, 13 Apr 2008 23:48:25 -0500

]]>

AMT Electronics Mattias Eklundh Freak Guitar:

AMT Custom Shop Signature model of Swedish guitarist Mattias "IA" Eklundh www.freakguitar.com. Mattias is one of the most unique, extraordinary, and talented guitar virtuosos of the contemporary music world.

The new dual-tube Overdrive/Distortion in an originally designed AMT box with a 1.5mm stainless steel deck panel preventing tubes and controls from mechanical damage. This is truly a road worthy pedal!

The semi-parametric MF equalizer is the major distinguishing feature of this device. Using TWO mid control knobs (MID and MID FREQ) you can not only increase or decrease MF levels but also chose the band pass central frequency. This will give you a chance to control your instrument's tone more flexibly not offered with other regular effects.

Each of the two foot switches is equipped with optical sensors which control the electro mechanic relay switching between modes on/off by means of a micro controller. Thus, we have eliminated the problem related to mechanical contacts wear-out due to frequent effects selection as in regular pedal effects.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Technical Information:

Power: External Adaptor AC 120V 15V 1A (included) Tubes: 2 x 12AX7
Incandescence - 12.6V (6.3V)
Anode Voltage: DC 230V
Jacks: Amplifier Output - for Combo Connection
Mixer Output - for Mixer/Recorder Connection
Bypass: Left F Switch - DRIVE effect on/off
Right F Switch - DISTORTION effect on/off Controls: Gain, Low, High, Mid, Mid Freq, Level

Audio Demo 1

Audio Demo 2

Audio Demo 3

]]>

AMT Electronics Guitar Packer Compression Effects Pedal

Sun, 13 Apr 2008 23:29:04 -0500

]]>

The Guitar Packer effects pedal is a compressor designed specifically for electric guitar. Equipped with a built-in noise reduction device, it cuts pickup background noise from the tone signal. Based on the principle of dynamic range compression, Guitar Packer combines a compressor and active tone regulator. Adjustable lows and highs as well as compression depth make it possible to obtain a variety of tone qualities.

Specifications:

Overall dimensions: 112mm/72mm/90mm

Weight: 450g

Controls: level, low, high, compression

Connections: in, out

Power requirements: External DC 9V, Self-contained 9V battery I consumes -9 mA

]]>

AMT Communist Pig Bass Distortion Pedal

Sun, 13 Apr 2008 23:18:00 -0500
]]>
AMT Electronics Capitalist Pig:

Tube driven, tamer brother to the Communist Pig. The Capitalist Pig was designed for bass players looking for that smooth fluid warm bass tone. Using a solid state amp and looking to add analog tone to your signal? The Capitalist Pig is perfect. Also retains the high quality tube tone for bass players already using vavle amps by not having to pass through other digital bass pedals. The creamiest, smoothest, warmest tube powered bass pedal available.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry. Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Technical Information:

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Low, High, Drive

Jacks: IN, OUT

Resistance: 1 kOm

Min Level: -40dB

Nominal: -26dB

Max Level: +17dB

Resistance: 1 kOm

Current Consumption: 420 mA with 9V

Power: DC 9V, 9V Battery or PSA (-) center Adapter

]]>

AMT Electronics EQ-7 Guitar Equalizer Pedal

Sun, 13 Apr 2008 23:10:45 -0500
]]>
AMT Electronics Guitar Equilizer EQ-7:

A graphic equalizer sensitive to the slightest adjustments changes. The seven equalization bands singled out from general guitar sound spectrum for adjustment and correction allow a musician to maximally approach ideal formula of individual sound. Place Guitar Equalizer the last one in the effect chain or connect it to a guitar processor output and you will obtain a unique tool eliminating the flaws which often are in the way during sound processing. You can also significantly decrease the amount of outside noises and pickups background noise or make corrections in the clean sound of your instrument.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Technical Information:

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Seven EQ Bands: 100, 200, 400, 800, 1.6k, 3.2k, 6.4k

Jacks: IN, OUT

Power: DC 9V, 9V Battery or PSA (-) center Adapter

]]>

AMT Electronics Analog Distortion Machine Effects Pedal

Sun, 13 Apr 2008 22:42:01 -0500
]]>
AMT Electronics Distortion Machine:

This is an analog distortion with digital control functions and effects parameters memory. The device has four banks (banks A,B,C,D), each of which has four programmable patches (patches 1,2,3,4) for storing user sounds. In fact it means that the owner of DistMachine DM-3 has a quick access to 16 patches with various effect parameters customized from the users favorite styles. The DistMachine DM-3 is capable of producing slight transparent overdrive in classic rock n roll style, to screaming heavy metal distortion type. It is the best of all the AMT Electronics pedals in one unit!

All factory tone settings can be copied from one patch to another (COPY function), changed as required and store to any patch (SAVE function) of any bank. Here we provided UNDO function, i.e. the opportunity to undo the last move and return to the previous one within the programmed patch. Besides, all factory distortion settings can be reset (RESET function). The friendly user interface of DistMachine DM-3 makes it simple to master the tone parameters editing, storing and copying techniques. Moving from one bank to another, from one patch to another or to BYPASS position is accomplished by means of two multi-functional foot switches.

All these functions make DistMachine DM-3 indispensable during live performances when a guitar player needs to switch among the distortion types without bending and stopping at exact moment. DistMachine DM-3 is the first device to incorporate new types of foot switches providing the device durability and switching reliability. In order to monitor the current status DistMachine DM-3, AMT incorporates a string of multicolored led indicators. They reflect all functions and parameter values of the device beginning from bank and patch number to all parameters that are being changed at a given moment.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry. Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Technical Information:

PARAMETERS CONTROL:

LEVEL - VOLUME LEVEL / COMBO parameters selection button- OFF/4,3

LOW - low frequencies level/ MIC parameters selection button - OFF AXIS/CENTER/CLASSIC

HIGH - high frequencies level / MOD parameters selection button HWRD/HI GAIN/CLEAN

DRIVE - signal spectrum expansion level / AMP parameters selection button CLF/BRT/TWD

UP - parameters model selector switch from 1 to 2

DOWN - parameters model selector switch from 3 to 4

BUTTONS COMBINATIONS:

SAVE - to save current patch parameters. (Level + Low)

COPY - to copy current patch. (Low + High)

UNDO - to cancel the last parameter change(High + Drive)

INSERT - to insert copied parameters into current patch. (Level + Drive)

CONTROL - to select footswitches mode(to select patches access mode) Up / Dn. (Up + DC9V)

BYPASS / BANK - to select instrument signal passage mode / to select a bank

INDICATION:

EFF/BAT - effect on/off and battery condition indicator

BANK - A,B,C,D bank indicator

COMBO - combo emulation mode indicator

OFF - combo emulator off

MICS:

OFF AXIS - the mike is off-center,

CENTER - the mike is directed straight at the speaker cone center

CLASSIC - the mike is positioned at some distance from the cabinet in the room

AMPS AND MODS:

MODS - Hot Wired, High Gain, Clean

AMPS - CLF Mesa Boogie style, BRT Marshall style, TWD Fender style

Power: DC 9V, 9V Battery or PSA (-) center Adapter

Audio Demo 1

Audio Demo 2

Audio Demo 3

]]>

AMT Electronics Tube Platinum Valve Distortion Guitar Pedal

Sun, 13 Apr 2008 22:13:57 -0500
]]>
AMT Electronics Tube Platinum Guitar Distortion Pedal

The Tube Platinum is in tube the series of effects based on the valve signal limitation principle. A 12AX7(ECC83) tube used in the Tube Platinum circuitry making it possible to obtain a real valve distortion with a unique warmth and density of tone characteristic parallel to real tube driven amps. It is designed for the player who prefers a dense saturated sound produced by a valve working in strong limitation mode. Even at high over-amplification level the valve limiter used in Tube Platinum does not suppress the signal dynamics, which results in wide and bright sound. A favorite pedal with guitarists that want the best lead distortion tube sound. Equipped with Level, Low, High, and Dist knobs for custom tone control.

The smallest, best sounding tube distortion pedal on the market. VERY compact design, making it easy to fit that huge tube tone on your not so big pedalboard!

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry. Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Min. level: -40dB

Nominal: -26dB

Max. level: +17dB

Resistance: 1 kOm

Max. level: +12dB

Current of the consumption: 420 mA with 9V

LEVEL: loudness of distortion.

LOW: regulates the level of low-frequency components.

HIGH: regulates the level of high-frequency components.

DRIVE: regulates the level of tube overloading.

Power: DC 9V PSA (-) center Adapter Included

Audio Demo 1

Audio Demo 2

]]>

AMT Electronics Metalizer Distortion Guitar Effects Pedal

Sun, 13 Apr 2008 21:59:46 -0500
]]>
Metalizer is the master of metal. Speed riffs, screaming leads, and chunky rhythm is what it's all about. Quickly becoming the "secret weapon" on many professional pedal boards and recording studios. A must for heavy players seeking the ultimate in metal tone. Equipped with Level, Low, High, and Dist knobs for custom control.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Low, High, Dist

Jacks: IN, OUT

Power: DC 9V, 9V Battery or PSA (-) center Adapter

Audio Demo 1

Audio Demo 2

Audio Demo 3

Audio Demo 4

Audio Demo 5

Audio Demo 6

]]>

AMT Electronics Extreme III Guitar Effects Pedal

Sun, 13 Apr 2008 21:31:51 -0500
]]>
AMT Electronics Extreme III:

Extreme III is a device designed for new-generation musicians that don't want to sound like everyone else out there. This is NOT your grandfathers classic transistor fuzz distortion! Unique distortion fuzz tone of this pedal are the best expressed for the musicians working in the environment of modern trends of hard rock. Equipped with Level, Low, High, and Distortion knobs for custom control.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Low, High, Dist

Jacks: IN, OUT

Power: DC 9V, 9V Battery or PSA (-) center Adapter

Audio Demo 1

Audio Demo 2

Audio Demo 3

]]>

AMT Electronics Astral Tube Distortion Guitar Pedal

Sun, 13 Apr 2008 21:23:01 -0500
]]>
AMT Electronics Astral Tube:

Astral Tube is a special custom designed pedal from AMT Electronics. This is Martin Hugland's, the guitar player of the Astral Doors from Sweden, signature pedal. The Astral Tube is one of toughest sounding valve distortion emulators on the market. The forced over amplification level, denser lows, and pronounced mid-tone constituent will make your guitar sound unbearably heavy and aggressively. Excellent for both lead and rhythm guitarists. Equipped with Level, Low, High, and Gain knobs for custom control.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Low, High, Gain

Jacks: IN, OUT

Power: DC 9V, 9V Battery or PSA (-) center Adapter

Audio Demo 1

Audio Demo 2

]]>

AMT Electronics Tweed Sound Overdrive Guitar Effects Pedal

Sun, 13 Apr 2008 21:14:33 -0500
]]>
AMT Electronics Tweed Sound:

Now being used by some of the Top 10 Country bands. Pure tweed country blues overdrive tone in one very convincing pedal. The best classic Tweed style pedal on the market. Cover anything from blues, jazz, chickin pickin, and classic rock with this baby. This pedal will fill the style voids in your pedalboard, try one out today. Equipped with Level, Low, High, and Drive knobs for custom tone control.

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Technical Information:

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Low, High, Drive

Jacks: IN, OUT

Power: DC 9V, 9V Battery or PSA (-) center Adapter

Audio Demo 1

Audio Demo 2

Audio Demo 3

]]>

AMT Electronics Tube Magnum Distortion Guitar Effects Pedal

Sun, 13 Apr 2008 21:08:36 -0500
]]>
AMT Electronics TMG Tube Magnum Valve Distortion Guitar Effects Pedal

The Tube Magnum is in tube the series of effects based on the valve signal limitation principle. A 12AX7(ECC83) tube is used making it possible to obtain a real valve overdrive with a unique warmth and density of tone characteristics parallel to tube driven amps. Tube Magnum is an overdrive style pedal with less gain than the Tube Platinum. It recreates that classic vintage style warm tube overdrive from your favorite, more expensive amplifiers.

The smallest, best sounding tube overdrive pedal on the market. VERY compact design, making it easy to fit that huge tube tone on your not so big pedalboard!

All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry.Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Size: 112mm (4.4") x 72mm (2.8") x90mm (3.5")

Weight: 420g (14.8 oz)

Min. level: -40dB

Nominal: -26dB

Max. level: +17dB

Resistance: 1 kOm

Max. level: +12dB

Current of the consumption: 420 mA with 9V

LEVEL: loudness of distortion.

LOW: regulates the level of low-frequency components.

HIGH: regulates the level of high-frequency components.

DRIVE: regulates the level of tube overloading.

Power: DC 9V PSA (-) center Adapter Included

]]>

AMT Electronics TH-1 Tube Hall Reverb Delay Effects Pedal

Sun, 13 Apr 2008 21:05:42 -0500
]]>
The Tube Hall has a great selection of reverbs, including 2 hall types, 3 room versions, 2 kinds of plate and spring. It features 8 types of delay and 16 factory presets you can edit and store in the pedal's memory.

An intuitive user interface makes it possible to master the stomp box in no time at all. Tube Hall is equipped with an LCD display showing all parameters currently in use both in operation and editing modes. Make adjustments via the single multi functional encoder knob and 2 foot switches based on optical components. Rugged construction, mono and stereo modes.

Includes Power Supply

Audio Demo 1

Audio Demo 2

]]>

AMT Electronics Du Hast Distortion Combo Emulator Pedal

Sun, 13 Apr 2008 20:33:24 -0500
]]>
MT Du Hast Distortion Combo Emulator Pedal.

Du Hast is an aggressive distortion stompbox, with an added punch of low frequency. Designed specifically for heavy and drop-tuned players. Where your old pedals quit or couldn't keep up, the Du Hast will easily take over and deliver searing crunch, screaming distortion, and thick bottomed rhythm. Equipped with Low, High, and Distortion knobs for custom control. All AMT pedals are designed to sound equally as good through an amp or direct recorded due to built-in cabinet emulation circuitry. Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone".

Size: 112mm (4.4"), 72mm (2.8"), 90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Low, High, Dist.

Ports: IN, OUT

Power: DC 9V, 9V battery, 6mA

Audio Demo 1

Audio Demo 2

]]>

AMT Communist Pig Bass Distortion Pedal

Sun, 13 Apr 2008 20:33:15 -0500
]]>There is no other bass distortion pedal that even comes close to this pedal. Add a huge amount of crunch and grind to your bass licks. Perfect for Heavy Metal or Speed Metal, VERY clear and clean hard overdrive distortion. There is some serious bass distortion ready to be unleashed with this pedal. Perfect for live performance and in the studio. You must try one to believe it. The first time you plug one in, you will be instantly addicted to the "AMT Tone."

Features:

Size: 112mm (4.4"), 72mm (2.8"), 90mm (3.5")

Weight: 420g (14.8 oz)

Control: Level, Low, High, Dist.

Ports: IN, OUT

Power: DC 9V, 9V battery, 6mA

]]>

Percussion Plus PP3800 5 peice drum set with hardware

Wed, 09 Apr 2008 09:16:33 -0500
]]>
New for 2008 is the Percussion Plus PP3800 series drum set. With high-quality 9-ply wooden shells, double-braced hardware and power toms, this drumset is an amazing value package for the beginning or advancing drummer.

Available in Blue, Red or White Pearl finishes

14" x 16" floor tom with 6 lugs per side.

16" x 22" bass drum with 8 lugs per side.

2 toms, 8" x 10" and 9" x 12" with 6 lugs per side.

5.5" x 14" wooden snare with 16 lugs.

Double-braced drum throne included.

Includes sticks, & standard drum key

Chain Driven Bass drum pedal with felt beater.

Double-braced cymbal and hi-hat stand

Telescopic fully adjustable drum spurs

Black finish drumhead on bass drum front, all the other heads are clear.

]]>

Fender Guitar Tech Work Station

Tue, 08 Apr 2008 22:54:36 -0500
]]>A soft pad with secured neck support cup holds a guitar at the proper angle for maintenance and adjustment. The neck support cup doubles as a storage compartment. The Work Station rolls up for easy storage in the provided tube. Fits all acoustic and solid body guitars. Guitar shown in photo not included.
]]>

Fender Deluxe Double Electric Bass Guitar Gig Bag

Tue, 08 Apr 2008 22:28:22 -0500
]]>
With over 50 years in the business, Fender has thousands of accessories available. Whether you're looking for apparel, hardware, strings, cases, straps or more Fender has you covered!

The Fender Deluxe Double Bass Electric Guitar Gig Bag features fashionable good looks and functional accessibility, plus more accessory pockets than ever to accommodate everything you'll ever need for the gig. Covered in tough 600-denier nylon with 4/5" (20mm) of premium internal padding and featuring a die-cast, 351-pick-shaped zipper pull, there is more style and protection than ever. The upgraded backpack system not only gives you three separate carrying point options but also features comfort-padded straps for the ultimate ride. Holds 2 Precision/Jazz or like shaped electric bass guitars.

]]>

Fender Deluxe Double Electric Guitar Gigbag

Tue, 08 Apr 2008 22:13:16 -0500
]]>
With over 50 years in the business, Fender has thousands of accessories available. Whether you're looking for apparel, hardware, strings, cases, straps or more Fender has you covered!

The Fender Deluxe Double Electric Guitar Gig Bag features fashionable good looks and functional accessibility, plus more accessory pockets than ever to accommodate everything you'll ever need for the gig. Covered in tough 600-denier nylon with 4/5" (20mm) of premium internal padding and featuring a die-cast, 351-pick-shaped zipper pull, there is more style and protection than ever. The upgraded backpack system not only gives you three separate carrying point options but also features comfort-padded straps for the ultimate ride. Holds two electric guitars.

]]>

Fender Standard Squire Mini Strat Electric Guitar GigBag

Tue, 08 Apr 2008 22:07:29 -0500
]]>
With over 50 years in the business, Fender has thousands of accessories available. Whether your looking for apparel, hardware, strings, cases, straps or more Fender has you covered!

The Fender® Standard Series Gig Bags are redesigned to feature fashionable good looks and functionality. Covered in tough 600D Nylon with 15mm of premium internal padding and featuring our new die cast, 351 pick shaped zipper pull on the giant front pocket, you and your instrument scream cool without breaking the bank.

]]>