jimbradyart
First Lieutenant  Posts: 1 Registered: 12/29/2008 Status: Offline
|
posted on 12/29/2008 at 14:06  |
HI everyone, please help...I recently got the kerry king set for my son for
his Ibanez IC400. The tech who was supposed to put them into the ic400
absolutely butchered the inside so I had to buy soldering iron and do
myself. I've been successful in some bits but I cannot find a single
diagram to show me how to wire the kerrykings emgs into the iceman. The
diaagram that came with the set was useless and only for 1 volume 1 tone
and didn't show where the blue wires from the 3way switch that is part of
the IC400 had to be wired into this EMG set. Also when I opened the 3 way
back the tec had disconnected the wiring here and I haven't a clue which
wires go where???? There are the 2 blue wires, 2 thin white wires and a
brown wire which I assume is earth/ground. If someone could help me out I
would really appreciate it as I up to now have it wired some way that it
works but no toggle swicth and loads of fuzziness which lasts 2 sec after
he plays any notes.
I don't want messages to get it to a guitar doc;-) I can do this myself if
someone shows me a diagram of how it is supposed to be wired as the emg
website has not got one single diagram which includes 2 tone 2 volume and
the brown and 2 white wires coming form the toggle switch. Oh yes the kerry
kings also hav a nice little booster..if you can include this in the
diagram that would be fantastic. please help..nails bitten to flesh!!!
|
| |
Telefreak
Moderator   Posts: 468 Registered: 1/12/2004 Status: Offline |
posted on 1/26/2009 at 09:54, Reply 1 |
The IC400 is basically wired like a Les Paul, so all you need is EMG's Zakk
Wylde wiring diagram.
http://www.emgpickups.com/content/wiringdiagrams/EMG-ZWset.
pdf
This will give you everything you need to know.
Start from scratch and follow the instructions and toy can't go wrong ____________________
Technology, not technique
|
| |
