rockbottom
First Lieutenant  Posts: 4 Registered: 3/1/2008 Status: Offline
|
posted on 3/1/2008 at 17:31 |
Has anyone tried to adjust the bias adjustment on a boss dm-3. I have 2 of
these pedals and one is great sounding, the other is flat and weak. I'd
like to try to adlust the bias on the pedal(there is three) Can i take the
values from the one pedal and apply to the weak one? If so, where do I hook
my meter up?
|
| |
brian
Moderator   Posts: 1075 Registered: 12/22/2003 Status: Offline |
posted on 3/1/2008 at 19:12, Reply 1 |
There should be 3 legs on each trim pot. you will have to take the pedal
apart then flip the board over. Your speaking about the clock speed. You
really need a oscilloscope, but if you listen closely you might hear some
clock noise in the delay. Adjust until it's not audible
|
| |
rockbottom
First Lieutenant Posts: 4 Registered: 3/1/2008 Status: Offline |
posted on 3/1/2008 at 20:21, Reply 2 |
The problem with the delay is that it's not as clear as my other dm-3. It
just sounds tired.
|
| |
Guitar101
Moderator  Posts: 481 Registered: 12/22/2003 Status: Offline |
posted on 3/1/2008 at 20:25, Reply 3 |
Umm let's start simple.. Are you using a battery?
|
| |
rockbottom
First Lieutenant Posts: 4 Registered: 3/1/2008 Status: Offline |
posted on 3/1/2008 at 20:33, Reply 4 |
Yes . battery is brand new.
|
| |
Guitar101
Moderator Posts: 481 Registered: 12/22/2003 Status: Offline |
posted on 3/1/2008 at 20:40, Reply 5 |
A thing to note is that just because all the parts are identical doesn't
mean every pedal will sound the same. Try the clock speed thing brian
suggested and see if that helps.
|
| |
