Hartke Piggy Back - 60 Watt 2-Channel Mini Stack

The Piggyback will blow the doors off a guitar rig twice its size. The amp is a compact 2-channel powerhouse with 60 Watts, 2-channels, a classic 12AX7 tube pre-amp section and tons of tone control. Independent channel gain controls, bass and treble controls for channel 1, bass, mid and treble controls for channel 2, variable spring reverb, effects send and return jacks, 1/4-inch stereo TRS CD input jack, 1/4-inch headphone jack, and a rear panel footswitch. Below the head is the sealed back GH60 speaker cabinet. Loaded with four custom-designed high-output 8-inch drivers, the GH60 reproduces sharp, clear clean tones, and rocks driving distortion tone with unbelievable intensity and depth. This combo will blow users of all levels away.

• 60 Watt 2-Channel Guitar Amp
• 4 x 8 Speaker Cabinet with high output Hartke Guitar Drivers
• 12AX7 Tube Pre-Amp Section with Independent Channel Gain
• Bass, Mid (channel 2 only) and Treble Controls for each channel
• Variable Spring Reverb and Effects Send/Return Jacks
• 1/4-inch Stereo TRS CD Input Jack; 1/4-inch Headphone Jack
• Jack for channel selection footswitch
• Head 7.5" x 20" x 9"
• Cabinet 26.5" x 24" x 12.5"

http://www.theguitarfiles.com/product_id-2162.html

The GT100c features the 100-Watt amp section driving two 12-inch speakers speciallydesigned for high output and serious volume, while providing killer tone.

• 100 Watt 2-Channel Guitar Combo with 2 x 12 speakers
• 12AX7 Tube Pre-Amp Section with Independent Channel Gain
• Bass, Mid (channel 2 only) and Treble Controls for each channel
• Built in Spring Reverb
• Send/Return Jacks for Effects Loop
• 1/4-inch Headphone Jack
• Channel selection/crunch footswitch included
• Weight 59 LBS
• 22.75" x 29.75" x 12"

http://www.theguitarfiles.com/product_id-2161.html

The GT60c is a 60-Watt Combo driving a single 12-inch speaker with all the presence and tone you'll find in a classic amplifier design.

• 60 Watt 2-Channel Guitar Combo with 1 x 12 speaker
• 12AX7 Tube Pre-Amp Section with Independent Channel Gain
• Bass, Mid (channel 2 only) and Treble Controls for each channel
• Built in Spring Reverb and Effects Loop Send/Return Jacks
• 1/4-inch Stereo TRS CD Input Jack; 1/4-inch Headphone Jack
• Jack for channel selection footswitch
• Weight 26 LBS
• 19 x 20 x 12

http://www.theguitarfiles.com/product_id-2160.html

Hartke AC75 Acoustic Ribbon Amplifier

Hartke has taken its experience in building great sounding bass amplifiers and brought it to the field of acoustic guitar amplification with the introduction of the Hartke Acoustic Ribbon Series. Perfect to go from the coffee house to the night club, the AC75 is a two channel 75 watt acoustic guitar combo. Designed in a precision tuned Kickback ™ enclosure, with two custom-voiced 5-inch full range drivers which naturally recreate the sound of the acoustic instrument without adding any unwanted coloration or distortion, and a 2-inch by 4-inch ribbon tweeter which adds clarity and overtones to the high end. Channel 1 has active and piezo instrument inputs, with bass and treble controls, while channel two has XLR microphone and RCA line inputs. There is a 5-band graphic EQ and a built-in 100 preset 24-bit digital effects processor, which can be routed to either channel. The AC75 features a 75 watt bi-amped design, with 50 watts powering the full range speakers and 25 watts powering the high frequency ribbon tweeter. To reduce feedback, there is a phase switch on channel 1 as well as a variable notch filter with depth control. On the rear panel of the amplifier there is an effects loop, and XLR direct outputs.

Details and Specs:

• 75 Watt Acoustic Guitar Combo
• Two 5" Woofers and a 2" x 4" Ribbon High Frequency Transducer
• 5-Band Graphic EQ
• Phase Switch and Variable Notch Filter Feedback Control
• 100 24-Bit Built-In Digital Effects
• Effects loop and direct output
• Precision tuned Kickback™ Enclosure
• Weight 37.5 LBS
• 17" x 16.5" x 11.25"

http://www.theguitarfiles.com/product_id-2159.html