Sam66
First Lieutenant   Posts: 3 Registered: 6/10/2004 Status: Offline
|
 posted on 6/10/2004 at 12:01 |
THE DISPLAY AND ALL THE LITTLE LED'S DONT WORK.IF I PLUG MY GUITAR IN AND
SWITCH THE UNIT ONE I CAN CHANGE EFFECTS.BUT I DONT KNOW WHICH ONE.CAN
ANYONE HELP ME 
|
| |
Guitar101
Moderator   Posts: 461 Registered: 12/22/2003 Status: Offline |
posted on 6/10/2004 at 12:09, Reply 1 |
Is it still under warranty?
One thing you could do is find a preset your used to using then get the
preset chart and go from there ____________________
|
| |
Guitar101
Moderator Posts: 461 Registered: 12/22/2003 Status: Offline |
posted on 6/10/2004 at 12:12, Reply 2 |
Check this out
http://www.samsontech.com/products/relatedDocs/707ii.pdf ____________________
|
| |
Sam66
First Lieutenant Posts: 3 Registered: 6/10/2004 Status: Offline |
 posted on 6/10/2004 at 12:55, Reply 3 |
Cheers 4 that. i have a copy of the manual but it has nuthin about how to
fix the dam thing
|
| |
Guitar101
Moderator Posts: 461 Registered: 12/22/2003 Status: Offline |
posted on 6/10/2004 at 13:44, Reply 4 |
What happened to cause this?
Was it dropped,stepped on...........
Or did it just go up at one time ____________________
|
| |
Sam66
First Lieutenant Posts: 3 Registered: 6/10/2004 Status: Offline |
posted on 6/10/2004 at 15:22, Reply 5 |
INE DAY I JUST PLUGGED THE POWER SUPPLY IN AND THE SOCKET BROKE OF THE
BOARD INSIDE.BUT AFTER LOOKIN INSIDE YOU CAN SEE THAT THIS WOULD NOT CAUSE
THE UNIT TO STOP WORKIN,BECAUSE THE SOCKET IS STILL ATTACHED BY 3 SINGLE
WIRES.AS I SAID ITS JUST THE DISPLAY AND LED'S THAT R NOT WORKIN 
|
| |
brian
Moderator  Posts: 1042 Registered: 12/22/2003 Status: Offline |
posted on 6/10/2004 at 18:04, Reply 6 |
It problery disturbed a soldering joint on the circuit board.
|
| |
Anonymous
Unregistered
|
posted on 6/11/2004 at 07:38, Reply 7 |
I THOUGHT THAT MAYBE ONE OF THE CAPACITORS INSIDE HAD BEEN DAMAGED SUM
HOW.SO IM GONNA TRACE THE SIGNAL THROUGH THE UNIT AND TRY AND FIGURE IT
OUT.I'LL LET YOU KNOW HOW I GET ON
|
| |
