seangee
First Lieutenant  Posts: 1 Registered: 6/9/2009 Status: Offline
|
posted on 6/9/2009 at 01:29  |
I'm trying to replace one of the pots (bridge volume) on my SG. After
toiling for over an hour with my new soldering iron, and FINALLY getting
all the wires properly secured where the belong, I went to test it out.
When cranked all the way up, full volume. When cranked all the way DOWN,
half volume. Why won't the volume go all the way down? Is there something I
should have done prior to make sure it was ready?
Any help is great, thanks!
|
| |
brian
Moderator   Posts: 1075 Registered: 12/22/2003 Status: Offline |
posted on 6/9/2009 at 08:15, Reply 1 |
make sure you don't have a cold solder joint and the wires are in the
correct places.
|
| |
